Temperature Logger Pro
This manual provides step-by-step instructions for setting up and accessing your IoT-based smart temperature logger. Follow the steps carefully to ensure proper operation.
Setup Instructions
Access Device Manual
Use your mobile device's camera to scan the QR code provided. -The QR code will direct you to the online manual page for additional details and troubleshooting tips.
Configure the Hotspot
Turn on the mobile hotspot on your Android device, set the SSID (network name) to "ATUMS," set the password to "1234," and ensure that the hotspot is active and broadcasting.
Verify Device Connection
Navigate to your Android device’s hotspot settings, check the list of connected devices, look for a device with a name prefixed with "ESP," and ensure that it is connected to the hotspot.
Access Logger Setup Page
Once the device is confirmed to be connected, you can access the configuration page by entering the IP address displayed on the devices screen in your browser.
Troubleshooting Tips
Troubleshooting ESP Device Connection Issues
If the device with the prefix “ESP” is not connected, try restarting the hotspot and the IoT device.
Verifying Hotspot Credentials for Connection
Ensure the hotspot SSID and password are correctly set as “ATUMS” and “1234”.
Troubleshooting Access to the Temperature Logger Configuration Page
If the webpage does not load, check if the device is properly connected to the hotspot and retry entering the IP address displayed on the device screen.
Restarting the Device to Resolve Connection Issues
If the webpage does not load, restart the device and allow it to reconnect to the hotspot before attempting to access the displayed IP address again.